Sea Green Furniture & Wall Paint

Sea Green Furniture & Wall Paint by Sophie James Decor

Sophie James Paint is a premium, water-based paint designed for both decorating and furniture projects, delivering outstanding quality and durability proven through more than 30 years of commercial use. With excellent coverage and a smooth, long-lasting finish, it’s suitable for a wide range of interior and exterior applications.

Covering up to 14 m² per litre, this paint offers reliable coverage for both furniture and walls. The quick-drying formula allows two coats to be applied within two hours, while brighter, more vibrant shades may need extra coats to achieve their full colour intensity.

The paint is self-priming and includes a built-in wax, eliminating the need for separate primers or protective topcoats such as varnish, lacquer or finishing wax. This makes it ideal for upcycling furniture and tackling larger decorating projects with fewer steps and less preparation.

Highly versatile, Sophie James Paint can be used on walls, furniture, wood, metal, glass, brick and concrete, and performs equally well indoors and outdoors when surfaces are correctly prepared. It’s also suitable for MDF, where the formulation penetrates and binds fibres for a durable finish, though extra attention may be needed on cut edges due to absorbency.

The paint does not contain chalk. Instead, it uses a non-toxic natural mineral that enhances durability, weather resistance and long-term appearance. All paints are water-based and formulated using high-performance resins and carefully balanced additives to ensure excellent adhesion, ease of application and a smooth finish.

Creative Finishes & Colour Choice

All Sophie James Paint colours are compatible and can be blended together, allowing you to create your own bespoke shade. This flexibility makes the range ideal for creative projects and personalised interiors.

The paint is also perfectly suited to distressed and vintage-style finishes. By layering colours and lightly sanding once dry, you can reveal underlying tones or natural wood for a timeworn, characterful look that complements both traditional and contemporary furniture.

As colours may appear different on screens, peel-and-stick samples and tester pots are available to help you choose the right shade with confidence.

Environmentally Responsible

Sophie James Paint is formulated to meet the UK Paint Directive 2012 ‘Low VOC’ standards. With a maximum VOC content of 10g per litre, it’s well below the permitted limit, making it a more environmentally conscious choice. Packaging is recyclable and orders are packed using biodegradable materials wherever possible.

How to Use Sophie James Paint

Good preparation is essential for a durable, long-lasting finish. All surfaces should be clean, dry and free from grease, polish, dust or loose paint, as contamination can prevent proper bonding and lead to reduced performance.

Begin by vacuuming the surface to remove dust. Clean thoroughly using sugar soap to remove oils, old polish and grime, working it into affected areas with an abrasive sponge or brush. Rinse thoroughly with clean water as you go and do not allow residue to dry on the surface. Wipe clean and allow to fully dry. Porous surfaces such as plaster, concrete, render and bare timber should be given extra time to dry completely.

Once dry, lightly sand the surface with fine abrasive paper to create a good key. Remove any flaking paint if necessary and fill larger cracks with a ready-mixed filler, allowing it to harden fully before sanding smooth. Finish by sanding the entire area, vacuuming and wiping down to remove all dust.

Special care may be needed for certain surfaces. Glass should be cleaned with a suitable solvent such as methylated spirits to remove airborne contaminants. Plastic should be washed with soapy water, dried, lightly abraded and dust-free before painting

Stir the paint thoroughly before use, ensuring pigment from the bottom of the tin is fully mixed. For ease of application, pour paint into a separate container. On unpainted plaster, the paint can be diluted by up to 10% with clean water for the first coat if required.

Apply using a good-quality brush or roller. Larger areas are best painted with a medium to short nap roller, while brushes are ideal for edges and detail work. Two coats are recommended for a high-quality finish, although very bold colours may require additional coats.

After painting, return any unused paint to the tin and clean brushes and rollers thoroughly with clean water.

For trade use, a full Material Safety Data Sheet is available on request.